Gateway Part 3 - Sending data from an Asset Gateway to the Management Portal

This part will walk you through how to collect data from within the Asset Gateway and send that data to be displayed on the Management Portal.

You can approach this problem in 4 steps:

1. Make sure you can access the sensor data you want to use.
   
2. Define a trigger that can monitor the sensor and then send the values to the Management Portal.
   
3. Start the trigger and start collecting the data.
   
4. Log on to the Management Portal and verify that the data is visible.

Assumptions

The following is assumed:

• You have a web browser and Internet connection.
• You have an account on the Management Portal.
• You have verified that the Asset Gateway is listed as "connected" in the Management Portal.
• The Workbench is installed on your computer with connectivity to your Asset Gateway.

What's Inside

This section contains the following pages: