Variables
The Apex Cleco driver supports the following Apex Cleco variables as device variables:
| Variables | Description |
|---|---|
| Controller Time | The time and date on the controller. This variable is writable and can be updated to modify the date and time on the controller. |
| Cell ID | The Cell ID of the controller. This is a numeric value that will range from 0 - 9999 |
| Channel ID | The Channel ID of the controller. This is a numeric value that will range from 0 - 20 |
| Controller Name | The name assigned to the Apex Cleco controller |
| Last Message Received | The time the most recent result data message (MID0061) was received. |
| Active VIN | The VIN that is currently loaded on the controller. |
| Active Parameter Set | The Parameter Set (PSET) that is currently active on the controller. |
| Active Job | The Job that is currently active on the controller. This variable will not be displayed if Jobs have not been configured on the controller. |
| mPro400 Parameter Set Variables | Description |
|---|---|
| Parameter Set ID | The numeric Parameter Set (PSET) ID. This will range between 0 – 999. |
| Parameter Set Name | The name assigned to the Parameter Set. |
| Rotation Direction | The rotation direction, where 1 = clockwise and 2 = counter clockwise. |
| Batch Size | The batch size defined for this Parameter Set. This is a numeric value that will range between 1 and 99. |
| Torque Minimum | The minimum torque value defined in the Parameter Set. |
| Torque Maximum | The maximum torque value defined in the Parameter Set. |
| Torque Final Target | The torque final target value defined in the Parameter Set. |
| Angle Minimum | The minimum angle value defined in the Parameter Set. |
| Angle Maximum | The maximum angle value defined in the Parameter Set. |
| Final Angle Target | The final angle target value defined in the Parameter Set. |
| First Target | The torque first target value defined in the Parameter Set. |
| Start Final Angle | The start final angle value defined in the Parameter Set. |
| Date of Last Change to the PSET | The date and time that the most recent change was made to the Parameter Set. |
| Active Job Variables | Description |
|---|---|
| Job ID | The numeric Job ID. This will range between either 0 – 99 or 0 – 999, depending upon the revision level defined in the controller. |
| Job Name | The name assigned to the Job |
| Forced Order | The forced order value defined in the Job, where 0=free order, 1=forced order, 2=free and forced |
| Maximum Time for First Tightening | The maximum time for the first tightening has a value between 0 – 9999 |
| Maximum Time to Complete Job | The maximum time to complete the Job. It has a value between 0 – 9999, where 0 indicates it is not used. |
| Batch Mode/Batch Count Type | The Job batch mode is the way to count the tightening in a Job; only the OK or both OK and NOK. This variable will contain a value of either 0 or 1, where 0=only the OK tightenings are counted and 1=both the OK and NOK tightenings are counted |
| Lock at Job Done | The lock job done setting for the Job, where 0=No and 1=Yes. |
| Use Line Control | The use line control setting for the Job, where 0=No and 1=Yes. |
| Repeat Job | The repeat job setting for the Job, where 0=No and 1=Yes. |
| Tool Loosening | The tool loosening setting for the Job, where 0=Enable, 1=Disable, 2=Enable only on NOK tightening |
| Reserved | Indicates if this is reserved for Job repair, where 0=E and 1=G |
| Number of PSETs | The number of Parameter Sets defined in the Job. This will be a value between 0 - 99. |
| Job Timestamp | The date and time of the of the most recent change to the Job. |
The Identifier and Result Parts information is represented as a single item named Identifiers. The Identifiers variable is an array with four members. Each of the four members represent one of the four Identifier and Result Parts variables that can be defined on an Apex Cleco controller. Each member in the array is a structure data type with three elements. The elements that make up the structure are defined in the table below.
| Active Identifier and Result Parts Variables | Description |
|---|---|
| Included in Work Order | 0=No, 1=Yes |
| Status in Work Order | 0=Not accepted, 1=Accepted, 2=Bypassed, 3=Reset, 4=Next, 5=Initial |
| Data | The value stored in this identifier location |
The Apex Cleco data variables are supported in the runtime environment wherever a variable is accessed and the variable is associated with an Apex Cleco controller. Some examples are:
- Workbench Variables window Read functions. The access level to all Apex Cleco variables is read only.
- Transport map data type parameters
- Trigger data type parameters
- Trigger action variable data type parameters.
The data representations in the Apex Cleco controllers, the runtime and the Workbench are supported by the necessary data conversion functions.