Set Modem Power Level

Warning

Setting the modem power level to Low Power will cause the modem to disconnect from the cellular network and render the gateway remotely inaccessible.

If the gateway is not registered on a network or is otherwise not accessible, it is not possible to reconnect the gateway back online through remote access. A trigger could use the Set Modem Power Level action with the Power Setting parameter set to Online.

However, if the gateway is on a network using an Ethernet connection, you can access it from the Workbench over the Ethernet connection and then re-connected to the cellular network by using the Administration -> Cellular Configuration tab -> Connect button. For more information, see Cellular Configuration.