IoT Gateway 19.1.6 Release Notes

What's new in the IoT Gateway 19.1.6 release

The latest released build is 19.1.6-002.

Customers using our Windows products should review the section below covering code upgrades and installations.  We moved to a new installation architecture for Windows products with version 19.1.6.

Following are the special instruction for this one-time transition from the pre-19.1.6 Windows Installer to the 19.1.6 and later Windows Installer. If you are upgrading the Enterprise Gateway for Windows product to version 19.1.6 or later, you must do the following:

  1. Perform a node backup of deviceWISE
  2. Backup all files used in the Staging Browser folders or properties files that were added outside of the original deviceWISE installation. (For example: C:\deviceWISE\Runtime\staging and C:\deviceWISE\Runtime\dwcore)
  3. Uninstall the (pre-19.1.6) version of the Enterprise Gateway for Windows product
  4. Install deviceWISE Enterprise Gateway for Windows or deviceWISE Asset Gateway for Windows using the given installers.
  5. Copy the files backed up from step #2 contained in the Staging Browser folders or properties files to the new installation folder. (For example: C:\Program Files (x86)\deviceWISE\Gateway\staging and C:\Program Files (x86)\deviceWISE\Gateway\dwcore)
  6. Restart deviceWISE
  7. Restore your node.
  8. After updating to 19.1.6, you will need to add all device drivers and extensions from the new 19.1.6 release level.

Customers upgrading the Enterprise Gateway for WinCPU product should install 19.1.4 or wait for a later release.

Customer Documentation Reminder

Asset Gateway for Linux 64-bit Snap

  • New platform released in 19.1.6.

Asset/Enterprise Gateway for Windows

  • Installer architecture upgraded to use WiX technology
  • Compliant with latest Windows installer security requirements

deviceWISE Runtime

  • Global Device will use subscription, not polling
  • Global publisher updated to clean up and improve performance
  • System variable and logging updates
  • Limit the total maximum number of publishes on the queue
  • Remove general timeout on multi-subscribe and change it to an inactivity timeout
  • Minor bug fixes

Documentation

HTTP API

  • Added subscription parameter to only send device name and variable name with data
  • During subscription, allow option to send/publish initial data
  • Allowed Multiple Origins Access-Control in OPTIONS response
  • Added Multi-Login Support & Multi-Display on Single Login
  • Added Multi Subscribe Request to not include types in the array but instead as designated arrays
  • Removed the subscription ID on the multi-subscriptions
  • multisubscribe - Returns specific variable and channel on error when possible.

Transaction server

  • Add support for import of TE items via Configuration Import Action

Drivers

Navigate to the Management Portal -> Developer page -> Resources item to identify the drivers and driver versions supported on a specific platform with this release. Both new installations and updates should include the drivers for this release.

  • Mindsphere – Add a communication handle for each active trigger action to increase throughput. Fix defects.
  • Modbus – XML description files now support the “wordswap” value for the data_conversion attribute.
  • MQTT – MsgID attribute wasn’t being honored when acknowledging a received message.
  • OPC UA Client – Fix defects see below.
  • Rockwell – Add additional diagnostics entries for unsolicited matches. Add support for unsolicited messages that use remote paths in the destination address. Corrections made to improve error catching.

The following defects were fixed in this release.  

Build

MAP-13826: New Workbench installer should not include version in product name

Description: Fixed in 19.1.5

MAP-13916: Cannot Install NTP Package On Compute Module Due to No Init Script LSB Header

Description: Fixed in 19.1.5

MAP-13884: Firewall rules not being applied when deviceWISE is started on MultiTech rCell

Description: Fixed in 19.1.5

deviceWISE Runtime

MAP-13913: ERR_VAR_COUNT_OVERFLOW and ERR_VAR_BITOFS_MISSING passed to driver functions from core

Description: Fixed in 19.1.5

MAP-13901: Configuration Import action fails in importing transaction engine items with authorization error

Description: Fixed in 19.1.5

MAP-13900: Core - DW_VARIABLE_DATA reports incorrect var->offset for offset -1

Description: Fixed in 19.1.5

MAP-14013: HTTP Server Fails to Respond (Socket Problem)

Description: Fixed in 19.1.6

MAP-13990: Very active nodes freeze and restarted with mutex lock

Description: Fixed in 19.1.6

MAP-13988: Variable Block Write Crash

Description: Fixed in 19.1.6

MAP-13987: Variable Read From Array Offset Crash

Description: Fixed in 19.1.6

MAP-13986: Invalid Read on Generic Admin Panel

Description: Fixed in 19.1.6

MAP-13963: event.c dw_event_complete missing indirect_unget

Description: Fixed in 19.1.6

MAP-13933: Enterprise Gateway - Security Vulnerability using LDAP Authentication

Description: Fixed in 19.1.6

MAP-14028: Invalid Read results in a crash

Description: Fixed in 19.1.6

Drivers, Proxies, and Packages

MAP-13521: Modbus driver – add support for "wordswap” XML attribute

Description: Fixed in 19.1.5. The Modbus XML data_conversion attribute supports the “wordswap” value. This is supported for FLOAT4, INT4, and UINT4 variables.

MAP-12950: OPC UA Client can show bad values in Variables Panel when Watch Window is used

Description:  Fixed in 19.1.5

MAP-12463: OPC UA Client cannot read some STRINGs in arrays

Description:  Fixed in 19.1.5

MAP-12457: OPC UA Client with Structures allows read 1 count past maximum array size

Description:  Fixed in 19.1.5

MAP-13903: Read of Rockwell ControlLogix TCP STRING10 array with count of more than 16 crashes node

Description:  Fixed in 19.1.5. The is condition filled a 256 byte buffer, reading an additional string led to a buffer overflow condition.

MAP-13893: -6237: Device protocol error. Ext. Status 5 When writing to a tag that is a string, length 10, that is an array of 300.

Description:  Fixed in 19.1.5. Managing the buffer for many small strings was fixed to correct protocol errors that resulted when bad packets were being sent to the controller.

MAP-13934: Rockwell: Not all data is getting into ControlLogix Device

Description:  Fixed in 19.1.6. Large write requests containing mixed data types were formatted into multi-write messages. Occasionally packets were created that exceeded the maximum size allowed by EIP.

MAP-13891: deviceWISE restarted due to possible Rockwell mutex deadlock

Description:  Fixed in 19.1.6. Additional error catching was added to the driver to reject requests before they were sent to the PLC. Some of these conditions could lead to situations where the driver hangs waiting for a non-existing packet to arrive

MAP-13891: deviceWISE restarted due to possible Rockwell mutex deadlock

Description:  Fixed in 19.1.6. Additional error catching was added to the driver to reject requests before they were sent to the PLC. Some of these conditions could lead to situations where the driver hangs waiting for a non-existing packet to arrive

MAP-13960: MQTT replying to all messages with MsgID = 1

Description:  Fixed in 19.1.6. Acknowledging replies were being sent with a MsgID value of 1. The driver was fixed so that acknowledgements now use the MsgID value in the received message.

Transaction Server

MAP-13902: Transaction Engine update needed to support import of TE items via Configuration Import Action

Description:  Fixed in 19.1.5

MAP-13905: Mapping logs live transactions don't get reported if using Linux environment

Description:  Fixed in 19.1.6

Workbench

MAP-13914: Workbench partial update fails with new installer location

Description:  Fixed in 19.1.5

MAP-13904: No Workbench logs files generated

Description:  Fixed in 19.1.5

More information about drivers can be found on the Device driver list.

The following drivers are fully supported and deemed "Generally Available" with this release.

Driver Name Version
Atlas Copco 3.4.4
Beckhoff   2.1.4
Apex Cleco 1.6.3
Danlaw  2.12.2
FANUC 2.3.1
NMEA GPS 1.0.2
LDAP - updated in 19.1.6 1.1.1
Lua  1.1.2
Mitsubishi Electric 3.3.0
MindSphere - updated in 19.1.6 2.0.0
Modbus Client - updated in 19.1.5 2.8.4
Modbus Server  1.1.5
MQTT Client 1.3.0
MTConnect  1.2.6
OAuth2  2.2.0
Omron  3.6.7
OPC DA Client 2.6.0
OPC DA Server 1.1.5
Allen-Bradley (Rockwell Automation) - updated in 19.1.6 2.17.4
Siemens 2.10.3
Sysmon 1.0.0
TR50 - updated in 19.1.5 2.0.4

The following drivers have a "Pilot Ready" status.

Driver Name Version
FANUC CNC 1.2.1
OPC-UA Client  - updated in 19.1.5 2.4.2
Pointer  1.12.0
Emerson Rocplus  2.0.2
SNMP 1.0.0
Sturtevant Richmont 1.7.3
TCP  2.2.0

The following drivers and packages are "Prototype" level.

Driver Name Version
Advanced Display Protocol 1.0.1
BACnet IP  2.2.0
Banner Engineering 1.0.0
Bosch Rexroth  1.7.3
CTI  2.1.4
Davis 1.0.0
Escort Memory Systems (EMS) 1.0.0
E-Sensors 1.0.0
Fuji 1.0.0
GrovePi (Only in Raspbian directory)  1.0.1
Hawkeye (MicroScan Systems)  1.0.0
Hue 1.0.0
iCaddy 1.0.0
Lora (Semtech) 1.0.0
ScanTools OBD-II 1.0.0
Oramoc 1.0.0
Pepperl+Fuchs  1.0.1
Pike Aero 1.0.0
Sandbox 1.0.0
SICK CLV Scanner  1.0.0
Sigfox 1.0.0
SQElectronics 1.0.0
Symbol 1.0.2
Virtual  1.3.0
WebMI 2.0.0
WSAPI 1.1.0
Xirgo 1.3.0
Z-Wave 1.0.0

deviceWISE Enterprise Gateway products

  • Software Products
    • AIX 32-bit  (Version 6.1 and Version 7.1)
    • AIX 64-bit (Version 6.1 and Version 7.1 and Version 7.2)
    • Linux 32-bit (CentOS 5 and CentOS 6)
    • Linux 64-bit (CentOS 6 and CentOS 7)  
      • No CentOS 5 support
      • Full - for deviceWISE Enterprise Gateways for 32-bit Linux installed on 64-bit CentOS Operating Systems (requires 32-bit glibc, e.g. glibc.i686 on CentOS 7)
      • Full - for deviceWISE Enterprise Gateway for 64-bit Linux 
    • Windows (Windows XP SP3, Windows 7, Windows 10, and Windows Server 2008 R2, Windows Server 2012 R2, Windows Server 2016 64-bit)
  • Embedded Products
    • Dell Edge 5000 - WindRiver Linux 7; Ubuntu Server
    • Mitsubishi MES Interface IT
    • Mitsubishi WinCPU
    • Rockwell ControlLogix
    • Siemens ERPC

deviceWISE Asset Gateway products

  • Software Products
    • Linux 32-bit (CentOS 5 and CentOS 6)
    • Linux 64-bit (CentOS 6 and CentOS 7)
      • No CentOS 5 support
      • Full - for deviceWISE Asset Gateways for 32-bit Linux installed on 64-bit CentOS Operating Systems (requires 32-bit glibc, e.g. glibc.i686 on CentOS 7)
      • Full - for deviceWISE Asset Gateway for 64-bit Linux
    • Linux 64-bit (Snap) NEW in 19.1.6
    • Windows (Windows XP SP3, Windows 7, and Windows 10)
  • Embedded Products
    • Advantech Uno*
    • B+B SmartWorx Spectre V3
    • CalAmp LMU-5000 (Rev C and Rev G)
    • CalAmp CDM-5030
    • Cisco 829  
    • Cisco IE 4000
    • Cypress CTM-200  
    • Dell Edge 5000 - WindRiver Linux 7
    • GateTel EZMoto V2
    • Mitsubishi CCPU
    • MultiTech Conduit (with Serial and GPIO and cellular modules)
    • MultiTech Conduit AEP for AT&T**
    • MultiTech OCG-D (Models H4, H5, and EV2)
    • MultiTech rCell (Model MTR-LAT1-B07)
    • NetComm Wireless Routers (NTC-6200, NTC-40, NTC-30WV, NWL-12, NWL-11)
    • Option CloudGate (Models CG0192 and CG0112 with v1.x or v2.x firmware)
    • RedLion (Pilot Ready)
    • Siemens (MicroBox, NanoBox)*
    • Siemens IoT 2000 (Wired only)
    • Siemens ERPC*
    • Systech SysLINK SL-500 
    • USRobotics 3510
    • Vantron VT-M2M-LV 
    • Xmodus XM1710E (Pilot Ready)

Limited Release** features

* - Denotes a supported gateway that was not specifically tested for this release. Of the Asset Gateways listed, most use a standard Linux or Windows load or they are very similar to a tested Enterprise Gateway.

** - Limited Release features meet customer specific features and configurations. These features may not be available in all hardware and operating system configurations.

Actions and Events

MAP-14071:  Firmware update is blocked for Asset Gateway Linux nodes to build 19.1.6

Applies to all the Asset Gateways using Linux Operating System. Does not affect Enterprise Gateways.

Description:  Firmware updates to 19.1.6 for any Asset Gateway node that uses Linux are blocked.

Workaround: Create a Software Update Package (SUP *.sup) file containing the appropriate 19.1.6 Linux dwu file. Add that file as a package in the Workbench Packages panel to do the firmware update. For more information, see Software update package and Software update package processing.

MAP-7740:  Log Message action not logging the $ char in a log message

Description:  The Log Message action does not write the $ char in an exception log message.  This can be bypassed by using 2 $ chars back to back.

Hot-Edit of Started Triggers

MAP-11421:  deviceWISE crashed when Editing and Saving a Started trigger

Description:  Intermittent issue where deviceWISE crashed when attempting to Edit and Save a Started and Loaded trigger

Asset Gateway for CalAmp

MAP-5369:  OS Shutdown action does not work on a CalAmp RevC or RevG

Description: The OS Shutdown action does nothing when executed on a CalAmp RevC or RevG. This feature has not been implemented in the Asset Gateway for CalAmp.

Asset Gateway for Linux X64 Snap

MAP-14050: Linux X64 Snap missing the /www/deviceWISE folder in staging directory

Description: Since this folder is missing in the 19.1.6 version of the Asset Gateway for Linux X64 Snap product, the JavaScript API will not work with product as released. If this JavaScript API is required, then contact your Telit representative to obtain file and instructions for installing those files.

Asset Gateway for MultiTech

MAP-4860:  Local time zone for Brussels is 2-hours off

Description: Setting the local time for Brussels, Belgium is two hours off in the Asset Gateway for MultiTech.

Workaround: Select the local time option for Paris, France in the Asset Gateway for MultiTech.

MAP-12085:  MultiTech OCG platform Local I/O initialization failure  

Description:  Local I/O features do not work in releases from 17.1.13 through 17.2.8.  This was fixed in 17.2.9.   

Asset Gateway for Option CloudGate

MAP-8230:  Option V2 CDMA: Message corruption on Send SMS

Description:  For Option CloudGate CDMA-equipped models, cellular Actions and Events related to SMS send and receive are not supported.

MAP-8231:  Option V2 CDMA: Sending a large SMS message fails on with internal CloudGate api error

Description:  For CloudGate Option CDMA-equipped models, cellular Actions and Events related to SMS send and receive are not supported.  Sending a large SMS > 160 characters fails with a CloudGate API error on an option V2 CDMA node.

MAP-10092:  No TR50 S&F disk storage type support for Option CloudGate V1

Description:  TR50 S&F support is present, but the S&F disk storage type is not available.

Asset Gateway for USRobotics

MAP-10662:  No TR50 S&F disk storage type support for USRobotics

Description:  TR50 S&F support is present, but the S&F disk storage type is not available.

Device types

MAP-9212: Be aware of endianess when importing or exporting Global Variables device and data values

Description: When exporting a Global Variables device with its data values from one node and then importing the Global Variables device and the data values into another node, the endianess of the nodes must be taken into consideration. For example: exporting from a big endian node (Power PC) and then importing into a little endian node (X86). The numeric data values will not be correctly represented in the imported node.

After the import, the Global Variables device should be edited, and the data values reviewed and modified.

Enterprise Gateway for Siemens ERPC

MAP-1933: On a Enterprise Gateway for Siemens ERPC, a controlled Listener fails to connect to queue manager on first attempt

Description: When accessing a WebSphere MQ server via a transport or a listener, the very first connect request after boot fails due to a limitation in the firmware. Subsequent connect requests work correctly.

Workaround: Repeat the connect request.

MAP-3634: FTP action with Transfer Mode set to Active fails on Enterprise Gateway for Siemens ERPC

Description: When using a trigger FTP action, the Put and Get operations do not work when Transfer Mode set to Active on ERPC.

Workaround: Set the Transfer Mode parameter to Passive instead of Active until the problem is fixed in a future release.

MAP-5707: FTP client does not connect to server in passive mode on ERPC

Description: The deviceWISE FTP Server in the Enterprise Gateway for Siemens ERPC cannot support a FTP client in passive mode.

Workaround: Use the FTP active mode instead.

MAP-6793:  A TR50 connection with SSL will fail on ERPC

Description:  TR-50 is not supported on the ERPC platform

MAP-9820:  VxWorks-based Enterprise gateway platforms lose SQLServer Connectivity after Windows updates

Description:  Windows updates add new items to the Windows cipher suite and change the default order of items within the cipher suite.  This prevents a successful connection with SQL server. 

Workaround:  Move this cipher suite “TLS_RSA_WITH_AES_256_CBC_SHA (53)”, to the top of the list of cipher suites.  See the More Information section on this Microsoft page for instructions to configure the SSL Cipher Suite Order Group Policy setting :  https://support.microsoft.com/en-us/kb/3161639.  Using this method retains the order of the cipher suites across subsequent Windows updates.

MAP-11664:  VxWorks-based Enterprise gateway platforms cannot process empty ResultSets from an Oracle Stored procedure 

Description: If you execute an Oracle database stored procedure transport map that returns result sets in output parameters the transaction action will fail if the result set output parameter is null.

MAP-11665:  VxWorks-based Enterprise gateway platforms cannot process empty ResultSets from a SQLServer Stored procedure 

Description: If you execute an SQLServer database stored procedure transport map that returns result sets the transaction action will fail if the result set is empty.

Enterprise Gateway for WinCPU

MAP-14053: WinCPU product is not part of the 19.1.6 release

Description: We found an issue with the WinCPU product in the 19.1.6 release and temporarily removed that product. Customers running the Enterprise Gateway for WinCPU should use the 19.1.4 release or wait for the next deviceWISE release.

Enterprise Gateway for Windows

MAP-3455: The Enterprise Gateway for Windows Restart feature from the Node Administration tab does not work as designed

Description: The Restart feature available from Workbench -> Administration -> Node Administration tab may not cleanly stop and then restart the runtime. When there are many active transports and listeners, the Transaction Server does not restart properly.

Workaround: Follow the instructions in the section "Manually restarting a node" on Enabling MySQL support.

MAP-10766: Logon credentials for the Windows Services "deviceWISE Transaction Engine" and "deviceWISE Core" are reset after deviceWISE upgrade or downgrade

Description:  If you change the logon credentials of the deviceWISE Windows Service entries which include "deviceWISE Transaction Engine" and "deviceWISE Core", they will be reset to the default service credentials after a firmware update to a newer or older version. 

Workaround: Navigate to the services panel and re-enter the logon credentials after the firmware update and restart the service entries.

Local Database (Local DB) 

MAP-4732: The Local DB Import action with the "First Row is Header" parameter set to true fails.

Description: Importing a csv file with a header row into a Local DB table will cause a failure.

Workaround: Set the "First Row is Header" parameter to false, import it, and then remove the first row.

MAP-5404: Problem reading database entries when a comma/line-feed combination is the last item in a list of database entries

Description: If a comma/line-feed combination is the last item in a list of database entries, then a problem occurs

Workaround: Add a dummy column in the database to represent the blank after the comma. For example, if you have 15 data entries and the last entry has a comma, then add a 16th column to your database.

Modem

MAP-3167: Simultaneous Cellular connect/disconnect and Modem power on/off can cause reboot of Asset Gateway

Description: We found a scenario where the Asset Gateway will reboot when simultaneous control actions are executed. When the Set Modem Power Level action and the Control Cellular Connection action (or Workbench operation) is executed repeatedly and simultaneously, a crash can occur resulting in a reboot.

We have not seen this problem during normal operation where the use of the Set Modem Power Level action cycling of power between "Online" and "Low Power" rarely occurs.

Transaction Server

MAP-685: Transports do not recover properly from Store and Forward

Description: When using the WMQ transport and the transport reports the error MQJMS007, it might cause the transport to switch in and out of Store and Forward, even though the transactions are successfully delivered to the WMQ queue.

Workaround: Check the WMQ queue manager. If the listener shows the state other than Started, then it is likely that you have encountered this issue. Set the listener to Started to restore proper functionality.

MAP-2972: Enterprise Gateway for Siemens ERPC faults with Transaction Server not being able to connect after a package remove

Description: After an Add or Remove of a package, such as a device driver, the node might have a fault where the Transaction Server cannot connect.

Workaround: You will need to restart deviceWISE. Follow the instructions for Manually restarting a deviceWISE node on Packages.

MAP-3930: IFS: sometimes the Transaction Server fails to start

Description: When setting transports, especially an iTAC transport, with "Load transport at initialization" parameter checked, and using a memory optimized Transaction Server that is not a match for the transports with "Load transport at initialization", it is possible that the Transaction Server will fail to start on Mitsubishi MESInterface IT nodes. Rebooting the module with the "Standard" Enterprise Access option will allow the Transaction Server to come up successfully, the transports can then be modified to remove the "Load transport at initialization" parameter. The memory optimized Transaction Server can then be re-set to the desired one.

MAP-4002: Updating logical variables in a transport map and not editing the corresponding trigger can lead to undesirable consequences.

Description: In this scenario the trigger will be disabled when it fires, and the action will return an error code of -6409 (invalid variable type) in the Exceptions log. Because the trigger will not be recovered on its own, the user will have to edit and re-save the trigger manually.

MAP-4796: NVARCHAR Support Limitation

Description: The NVARCHAR and NCHAR datatypes for Oracle are not supported on the following platforms:

  • Mitsubishi MESInterface-IT
  • deviceWISE Enterprise Gateway for Siemens ERPC

MAP-5170: JSON payload transport maps for the HTTP transport are not supported on all platforms

Description: This feature is not supported on the following platforms:

  • Mitsubishi MESInterface-IT
  • deviceWISE Enterprise Gateway for Siemens ERPC

MAP-5684: JMS Netweaver Transport/Listener on an Enterprise Gateway for Siemens ERPC cannot initialize connection with the JMS Netweaver server

Description: This feature is not supported on the following platforms:

  • Mitsubishi MESInterface-IT
  • deviceWISE Enterprise Gateway for Siemens ERPC

MAP-5685: JMS Netweaver support jars are not packaged with the ERPC or MESInterface IT product install files

Description: This feature is not supported on the following platforms:

  • Mitsubishi MESInterface-IT
  • deviceWISE Enterprise Gateway for Siemens ERPC

MAP-6604:  HANA database insert fails ERPC

Description: The NVARCHAR and NCHAR datatypes are not supported on the deviceWISE Enterprise Gateway for Siemens ERPC product.

MAP-7388:  New Oracle JDBC driver transport maps cannot enumerate schemas/table definitions on an Oracle 9 server 

Description:  Beginning with the deviceWISE 15.1 release, the deviceWISE Enterprise Gateway products for Linux, Windows and AIX use a later version of the Oracle JDBC driver that only supports Oracle 12.1, 11.2, 11.1.

 Oracle 9.2 was end-of-lifed in July 2010. 

The MESInterface-IT and deviceWISE Enterprise Gateway for Siemens ERPC products are able to enumerate schemas from Oracle 9.2 because the JDBC driver has not been updated.

MAP-9082:  Null Macro test: Select fails when a default timestamp of format 01/11/12 12:45:00.000 is used in place of a NULL value returned

Description:  If you need to specify a default value for SQLServer datatypes for DATE and TIME when using the following enterprise gateway products: 

  • Mitsubishi MESInterface-IT
  • Enterprise Gateway for Siemens ERPC

then you will need to use a long value that represents milliseconds since 1/1/1970 instead of the default format 'mm/dd/yy HH:MM:SS.sss',

MAP-11311:  AIX java8: SSL Error when attempting to connect to SQL Server 2008 and below

Description:  The database transport on deviceWISE Enterprise Gateway for AIX and AIX64 cannot complete a connection to SQLServer 2008 running on Windows XP due to incompatibility with SSL. The workaround is to access the SQLServer database on a newer operating system.  

MAP-12324:  VxWorks platforms: Failure to connect to Oracle 12c server with SQLException: No matching authentication protocol

Description:  VxWorks-based platforms with Oracle database transport fails to connect to the Oracle 12c server with the following error:   "java.sql.SQLException: ORA-28040: No matching authentication protocol "
The issue is caused because Oracle 12c is configured to use a default minimum authentication protocol of 11 and the VxWorks-based gateway product uses an older unsupported JDBC driver tied to JDK 1.5. This is equivalent to an Oracle 8 client and consequently uses an Oracle 8 authentication protocol.

Workaround:

  • Configure the sqlnet.ora file with the following parameters to allow a version 8 authentication protocol.
    • SQLNET.ALLOWED_LOGON_VERSION_SERVER=8
    • SQLNET.ALLOWED_LOGON_VERSION_CLIENT=8
    • SEC_CASE_SENSITIVE_LOGON=FALSE
  • Restart the server for these changes to take effect.
  • If you are planning on using an existing login id from the VxWorks runtime you will need to use PL/SQL and alter the password of the user to force the server to rehash passwords with compatible versions.
    • A recommended approach would be to create a new login id and specify those credentials on the Oracle 12c Transport on the VxWorks runtime.

Reference links:

MAP-12453:  Accessing a HTTP or SOAP server that presents an untrusted server certificate

Description:  Starting with Enterprise Gateway version 17.2.3, the HTTP and WS_SOAP transports have changed their behavior when establishing an HTTPS connection. The server needs to present a server certificate that is signed by a globally trusted CA. Otherwise the transport will receive a SSL Handshake Exception.

The workarounds are:

  •  Update the server certificate on the HTTPS server with one that is signed by a trusted CA.
  •  Create a java key store that includes the server's CA certificate using the keytool utility. Then specify this key store in the transport panel 'Keystore' and 'TrustStore' fields.
  • A less preferred option is to add the Organization/Company's root CA certificate to the 'cacerts' file. Note that this file will be replaced when the enterprise gateway product is re-installed.

MAP-12885:  MySQL Connector/J 8 version of the JDBC driver is incompatible with the Enterprise Gateway DB transport

Description:  The mySQL Connector/J v8 JDBC driver has changed the package name of the class that implements the driver. Use the mySQL Connector v5.x JDBC driver instead to enable mySQL support in the enterprise gateway.

Transaction Server XSD support

MAP-3141:  XSD: Xpath expression should not be saved in the XML if Specify Map and Sequence Keys in header check box is selected

Description:  This issue only affects JMS listeners with the XSD payload. When there is both an XPath expression and a JMS header property specified on the JMS listener XSD Payload panel, and the header property is missing from the incoming JMS message, the XPath expression is used to determine the listener map id, instead of the default listener map id.

MAP-3695:  XSD: Default or fixed value provided in the XSD will be erroneously used

Description:  If the XSD used to create a listener map contains a required attribute with a default or fixed value, it is considered valid. At runtime, instead of the XML being rejected as invalid, the default or fixed value provided in the XSD will be erroneously used.

MAP-4665:  XSD: Imported transport map and listener map definitions from an older runtime into a newer runtime are not namespace aware unless XSD is re-queried

Description:  If you are importing a transport map or listener map that was defined with XSDs and was created in a 12.4 or prior release, then the map needs to queried again and saved in order for 'nil' element processing to be handled correctly.

MAP-4666: Listener doesn't support XSDs with namespaces

Description:  A Listener configured to process XSD based payloads will not be able to successfully handle an XML with namespace qualified elements.

Workaround:  The workaround is to provide an XML request without namespaces.

Transaction Server Web Services SOAP

MAP-5181:  SOAP Header Parameter limited support

Description:  SOAP Header Parameter support is not available on the Enterprise Gateway for Siemens ERPC and Mitsubishi MESInterface-IT products.

TR-50

MAP-7007:  TR50: Deadlock  

Description:  Gateway may experience a rarely occurring deadlock condition after several days or weeks of operation.  If this occurs, a watchdog will expire and reset the gateway to resume operations.

MAP-8236:  Wait action is not being rescheduled after a time_sync. 

Description:  There is known issue relating to WAIT action completing immediately when the timesync is enabled on a TR50 connection that has a drift of 2 seconds or greater. This implied that the trigger's sequence of events that are time sensitive may execute quicker than expected when the OS system time is adjusted to sync with the IoT Portal platforms' time. 

MAP-10092:  Option CloudGate V1 failed when running TR50 S&F disk storage type tests with error storage->create_storage failed [-33533]

Description:  TR50 Store and Forward disk storage type is not supported on Option CloudGate V1 gateways.

Drivers

MAP-3140:  Siemens S7 listener gets stuck in stopping state on Enterprise Gateway for Siemens ERPC

Description:  After the Siemens S7 listener device receives data and a corresponding trigger is executed, stopping the Siemens S7 listener device results in the listener becoming stuck in the Stopping state. This happens during operations when the Siemens S7 listener device is using the normal TCP mode (not ISO-n-TCP). After a trigger executes the receipt of an unsolicited message, the S7 listener device cannot be stopped.

A firmware upgrade from Siemens is anticipated in order to resolve this behavior.

MAP-5066:  CloudLINK package remove isn't removing the feature  and  MAP-5158 Package remove failed - OS error

Description:  On some platforms with limited operating system resources for memory or disk (persistence storage), there may be failure when attempting to add or remove packages. These failures are the result of the limited system resources and possible runtime behavior such as memory fragmentation. When these failures occur, restarting the node at the operating system level (power off then power on) may then allow the package add or remove to succeed. In other scenarios, you may have reached a platform limit based on the application definitions, the number and size of packages added and other dynamic runtime requirements.

MAP-6082:  Writing an empty string for Siemens STRINGs of length 207 or more does not clear bytes as expected

Description:  If an empty string is written to a Siemens PLC, all the bytes of the string are set to 0x00 and the actual length byte is set to 0. This behavior changes when the maximum length of the string is 207 to 254 bytes. In this case the actual string length byte is set to 0, but the string bytes are not cleared. Not clearing the bytes is done to reduce the network traffic between the driver and the PLCs. Strings that are greater than 206 bytes requires the driver to send multiple messages to the server. The key to writing an empty string is setting the actual length byte to 0, so the string will have a NULL value.

MAP-6811:  Siemens LOGO PLC device disables periodically

Description:  Lab tests have demonstrated that the Siemens LOGO PLC will not maintain simultaneous socket connections from multiple nodes. The LOGO PLC will terminate connections, which results in the associated device becoming disabled. The disabled device will re-establish a socket connection to the LOGO, only to have that connection eventually reset by the LOGO. It is recommended that connections to the LOGO PLC be limited to one node at a time. 

MAP-6938:  Rockwell CIP Event will not work when Size of One Element is set to 0 and STRINGs have more than 444 characters

Description:  The Rockwell CIP Event allows the Size of One Element field to be set to 0 and any messages using STRINGs of 444 characters or less to be received. However, any STRING with greater than 444 characters will result in an error. The workaround is to make sure you indicate the size of the String being read in the Size of One Element field.

MAP-7694: Subscription on device that becomes stopped generates read errors

Description:  When subscribing to a started device that is later stopped, the subscription still attempts to read from that device and generates errors.

Workaround:  Workbench can workaround this by stopping subs on stopped devices and restarting again on start, but keeping the subs live when the device is stopped results in fewer commands being sent.

MAP-9022:  Cannot read variable when its name exceeds 128 characters on OPC UA Client

Description:  A variable's location name can be a maximum of 128 characters long.  The variable location name consists of the parent structure names plus the variable name.  Renaming a variable to fit the 128 character limit will allow you to read and write to the variable.  A variable with a location name greater than 128 characters long will not be able to be accessed, and will return an "Error: Variable does not exist" error.  This page has more information:  Accessing device variables.

MAP-9303:  OPC UA Client driver increases core handles and memory usage during StartStopStress test (Linux)

Description:  Attempting to start and stop many OPC UA clients on Linux causes the node to crash.

Workaround:  Limit the number of OPC UA devices per deviceWISE node to five.

MAP-9176:  OPC UA Client driver increases core handles and memory usage during StartStopStress test (Windows)

Description:  Attempting to start and stop many OPC UA clients will result in leaked memory. For reference, starting and stopping 15 clients constantly for 3 hours results in ~15MB lost. Restarting a node will clear this leaked memory.

MAP-9968:  BACNet Version 1.2.0 does not support Linux x64 platforms

Description:  BACnet is not supported on 64-bit Linux platforms.

MAP-10011:  Node crashes when disconnecting Ethernet cable when trigger is reading BACnet device variables

Description:  A problem has been seen in the lab where the system restarts if the network connection to the BACnet device is lost during the device start process

MAP-10145:  OPC-DA Client cannot write UINT4 value 2147483648 and greater

Description:  The largest unsigned integer value that the OPC-DA Client can write is 2147483647.

MAP-12201:  Atlas Copco Trace Data trigger fires even though a tightening wasn’t performed.

Description:  Testing in the lab has found instances where a Trace Data (MID0900) message is being sent by the Atlas Controller to deviceWISE, even though a rundown hasn’t occurred. This causes a started Atlas Copco Trace Data trigger to fire, if it is associated with that controller. The Trigger’s Result Data Identifier Event variable can be used to determine if this is a duplicate Trace Data message.

MAP-12442:  OPC-UA Client driver does not run on NetComm, CalAmp LMU5000 RevC, and Lanner

Description:  The OPC-UA Client driver is not supported on all platforms. Refer to the OPC-UA Client driver documentation at Supported OPC-UA Client environments.

MAP-12780:  Rockwell MicroLogix 1100 and 1400 devices get stuck in Stopping state on Siemens ERPC

Description: After several variable reads and writes, stopping the device might result in the device being stuck in the Stopping state, then resetting after about 10 minutes.

Backup before upgrading!  You should do a Backing up and Restoring a node's configuration of your configuration from the Workbench prior to upgrading to a new version of deviceWISE.

Updating from an earlier release level of an Enterprise Gateway to 19.1.6

If you are upgrading the Enterprise Gateway for Windows product to version 19.1.6 or later, you must backup your node, uninstall the Enterprise Gateway for Windows product, do a full installation, and then restore your node. We transitioned to a new installer architecture with the 19.1.6 release.

If you are updating an Enterprise Gateway from a 17.2.3 through 19.1.6 (inclusive) release, then you can use the firmware update option. A firmware update from a release before 17.2.3 is not supported.

If you are updating an Enterprise Gateway from a 17.1.14 or earlier release to 19.1.6, you must do a complete product installation. This is required to install the supporting libraries and 3rd party support files. These supporting files are not included in a firmware update for an Enterprise Gateway, but are included in a complete install.

After updating to 19.1.6, you will need to add all device drivers and extensions from the new 19.1.5 release level.

A firmware update from 16.1.8 or earlier to 19.1.6 is not supported for CentOS 7 or  systemd installations.  A full installation is required.

Updating from an earlier release of an Asset Gateway to 19.1.6

If you are upgrading the Asset Gateway for Windows product to version 19.1.6 or later, you must backup your node, uninstall the Asset Gateway for Windows product, do a full installation, and then restore your node. We transitioned to a new installer architecture with the 19.1.6 release.

If you are updating an Asset Gateway from a 17.2.3 through 19.1.5 (inclusive) release, then you can use the firmware update option.

If you are updating an Asset Gateway from a 17.1.14 or earlier release to 19.1.6, you must do a complete product installation.  A firmware update from a release before 17.2.3 is not supported. Alternatively, you can use the firmware update option to first update the older release to 17.2.3 and then do a firmware update to 19.1.6.   This is required to install the supporting libraries and 3rd party support files, which are included in the 17.2.3 firmware update. These supporting files are not included in a 19.1.6 firmware update for an Asset Gateway.

After updating the deviceWISE runtime 19.1.6, you will need to add all device drivers and extensions from the new 19.1.6 release level.

A firmware update from 16.1.8 or earlier to 19.1.6 is not supported for CentOS 7 or systemd installations.  A full installation is required.

For more information about upgrading your software, see Updating products.